Installing Wheel Spacers & Adapters
In this guide, we'll walk you through the process of installing wheel spacers adapters safely and efficiently, ensuring a seamless and secure fit for your new wheels.
How to Install Wheel Spacers / Adapters Safely
In this guide, we’ll walk you through how to install wheel spacers/adapters correctly, ensuring a secure and seamless fit for your wheels.
Tools & Materials
Gather the following items before starting:
- Wheel adapters
- Lug nuts
- Torque wrench (avoid using an impact gun)
- Jack and jack stands
- Lug wrench
- Socket set
- Thread locker (optional)
- Wheel cleaner & microfiber towels
Step-by-Step Installation
1. Prepare Your Vehicle
- Park on a level surface and engage the parking brake.
- Loosen the lug nuts but do not fully remove them.
2. Lift the Vehicle
- Use a jack to lift the vehicle and place it securely on jack stands.
3. Remove the Wheels
- Take off the lug nuts and remove the wheels.
4. Clean & Inspect
- Clean the hub using wheel cleaner and microfiber towels.
- Inspect the hub and adapter for damage or uneven surfaces.
5. Install the Wheel Spacers/Adapters
- Place the adapter on the hub, aligning the holes.
- Ensure it sits flush.
- Hand-tighten the lug nuts.
- If studs stick past the adapter, trim them down.
- Torque the nuts in a crisscross pattern to spec.
6. Mount the Wheels
- Install the wheels onto the adapter studs.
- Hand-tighten the lug nuts.
- Use a torque wrench to secure them properly.
7. Final Check
- Lower the vehicle and spin each wheel by hand.
- After driving ~50 miles, retorque the lug nuts.
8. Optional: Use Thread Locker
- Apply thread locker to adapter bolts for added security, if desired.
For best results, we recommend professional installation. Always prioritize safety, follow torque specs, and don’t hesitate to contact us if you need help.